The beauty of a car is closely linked to how much you take care of it! If, for example, your car has damaged or worn paint, it is natural that its appearance and market value will drop. This car devaluation is very easy to happen and can be associated with several factors, such as water stains. There are two types of water stains: hard water spots on cars resulting from a water discharge with calcium carbonate and a pH level above 7, and water stains from acid rain that fall in the form of carbonic acid and with a pH level close to 5.0 and 5.5. Both are extremely harmful to the car’s paint and aesthetics if you don’t remove them quickly. How to remove water spots from a car? That’s what we’re going to show you below by letting you know the seven effective ways to remove water stains from your car. These are extraordinary tips/recommendations that will leave your car shining and spreading class and elegance everywhere you go.
1. Wash and Rub the Car from End to End
One of the simplest and most effective ways to remove water stains from a car is to wash and scrub it with determination from end to end. Thus, it is necessary to lather your four-wheel vehicle to remove all dust and dirt that may appear on its surfaces. Removing water spots from a car is not an exact process and sometimes requires a combination of other cleaning procedures. The fact that you start washing and soaping your car is undoubtedly an excellent starting point that will allow you to eliminate most of the water stains.
2. Use a Clay Bar for More Effective Car Cleaning
Have you heard of the clay bar method? It is a simple and very effective cleaning method that can be used to clean and shine cars. Its use allows the removal of all mineral deposits, traces of soot, and other dirt that may be lodged in the outer plate/paint of your car. For this water spot remover to be used with maximum efficiency, the vehicle surfaces must be wet and soapy. Thus, the clay can effectively remove the layer of sodium carbonate resting microscopically on a car’s paint.
3. Use a Solution of Distilled Water with White Vinegar
The solution of distilled water with white vinegar is one of the best water spot removers for cars. This is because white vinegar contains natural acetic acid. This is primarily responsible for the dissolution of calcium carbonate and other mineral residues – and if you want to get rid of water stains in a car, this solution is perfect. Keep in mind that white vinegar is very acidic (has a pH of 2.5) and, as such, should be mixed with distilled water in equal parts so as not to be too aggressive for the car’s paint varnish.
On the other hand, if you want to know how to remove water stains from the car windows, this solution answers that problem. Prepare this water stain removal solution inside a spray bottle, spray in any desired locations, and use a microfiber cloth to remove traces of vinegar and mineral residues.
4. Use a Mineral Deposit Remover (MDR)
Another very effective way to remove water stains from a car is to use a natural deposit remover or mineral deposit remover (MDR) from your favorite car care brand. Typically, these products contain phosphoric acid, and it is incredibly strong at removing calcium carbonate and all kinds of trace minerals. Place the respective product on a microfiber cloth and rub it in the desired area for a period of 30 to seconds. In the end, wipe with a dry microfiber cloth to remove all water stains and impurities.
5. Mix Wheel Cleaning Acid with Distilled Water
If water stains don’t want to come out, use wheel cleaning acid. This product contains hydrofluoric acid and is highly impactful and corrosive. Keep in mind that this chemical should not be used on metal wheels, as it corrodes aluminum, steel, and chrome. But it should also not be sprayed directly onto the car because it will wear down all layers of varnish, glass surfaces, and rubber finishes. So, mix it with distilled water (in the 1 to 4 ratio) and be very careful when applying it in the car.
Spray the preparation onto a microfiber cloth and quickly wipe away any mineral deposits you find. Don’t forget to wear personal protective equipment such as a respirator, gloves, and goggles when handling this chemical because it can release toxic gases to your hands or face. In the end, rinse with a clean towel to let the car shine.
6. Pay Special Attention to Car Polishing
If you used wheel cleaning acid correctly with distilled water, your car has likely run out of trace minerals. However, you are not free to discover small cracks in the transparent surface of the car. When that’s the case, the only way to solve this problem or consequence of chemical corrosion is to polish or cut the car’s transparent layer to smooth it. This procedure is quite expensive and will have to be done by specialized professionals.
7. Prevent the Future Appearance of Water Stains in the Car
By now, you know that it is extremely difficult to get rid of water stains in a car – there may even be water spots on the car after washing. However, so that this does not happen so often, you can and should follow the following tips: Apply a quality Nano-ceramic coating, paint sealer, or wax regularly to protect the car body. Avoid parking next to sprinklers to prevent the car from being filled with traces of hard water. Wash your car after rain to get rid of all acidic contaminants and mineral residues.
Dry and polish the car with a microfiber towel whenever the car is wet or washed. These are the seven effective ways to remove water stains from your car so that it always stays clean and shiny and has a longer service life. Interiorize them and put them into practice whenever you need to remove water spots from your four-wheel vehicle. Thus, your car will always have a new and well-maintained aspect, keeping its market value and the greed of other drivers intact.